Aricles about water filter,water filter maintence,water filter tech,water filter installation and others.

Home>Productsys>Articles>Water_article>Details

As we turn on the kitchen faucet or start a bath, how the water is coming out may not be something we think about. (Unless of course is dripping or not coming out at all!) But, water pressure is something that we should all be familiar with.

Most households receive water from a municipal water system. In this method, the water is usually extracted from various groundwater sources and then treated to remove impurities. Then, it is then pumped to water towers, and then gravity takes over to provide the pressure that forces the water through pipes, and eventually to our homes. A similar process will take place in closed systems, as well as in lakes and reservoirs.

The pressure of water in each home will vary according to their elevation to the water source, as well as with the system that is delivering the water in. A plumbing company website says, "A cubic foot of water weighs 62.4 lb. and exerts .4333 lbs of pressure per square inch on the bottom of its container at a depth of one foot. Therefore, the discharge pressure of a water storage tower 100 ft. tall will be 43.33 psi. If your house is in a valley 50 ft. below the bottom of the tower, the theoretical water pressure at your house will be approximately 65 psi, reduced by the friction in the pipes."

Typical residential water systems are designed to function under a pressure of 40-70 psi. If the water pressure exceeds 100 psi, a pressure regulator may need to be installed in the line to reduce the pressure to an acceptable range. This protects the equipment in your home from damage caused by excess force exerted by the water. The opposite can occur too; if pressure is below 40 psi, a pressure-booster could be needed to bring it up to acceptable levels. Also, hard water can reduce pressure.

It is also important to not that water flow is not the same thing as water pressure. Water flow is the result of your water pressure on the amount of water available for delivery (volume). Low water flow could be a result of an obstruction on the water line, and old pipe with contain mineral build-up or corrosion that reduces the pipe's internal diameter. So, if a water pressure gauge is reading at an acceptable level but the pressure seems off, it may be a flow problem.

If you are unsure of the water pressure at your home, there are a few easy ways to test it. Home Depot carries water pressure gauges and we also carrie them here.  However, most tanks will already have this feature. Also, a constant pressure valve can easily be installed. This gadget will automatically set flow with the set pressure level for the system. A variable speed pump can also be installed, as well as additional pressure tank capacity-- this will require a professional plumber.